Product introduction

NIAX Catalyst A-400 is a water-soluble tertiary amine compound catalyst with delayed catalysis. It is used for moulding polyurethane foams, especially for the production of automobile seat cushions. Catalyst A-400 can be measured separately by mixing with water or polyether polyols. It has good effect on lasting pouring time and increasing opening foam structure. Catalyst A-400 and catalyst A-300 are both new types of delayed catalysis, which have delayed blow-out effect and increase milky white time. Catalyst A-400 is particularly suitable for complex die grooves that require longer casting time and have lower or non-corrosive properties for low carbon steel. Foam plastic products, can maintain for a long time, will not decay. Manufacture more open-cell foam plastics, reduce rolling opening force.

Product specification

Appearance of catalyst A-400: light yellow transparent liquid at room temperature, soluble in water; density (25 C): 1.15 g/cm3; viscosity (25 C): 140 mPa. s; flash point (PMCC): > 93 C;

Packing

It is packed in a clean, dry, sealed and leak-free special plastic drum with a net weight of 25kg.

storage and transportation

When transporting catalyst A-400, it should be strictly prevented from raining and contamination, and handled carefully to prevent leakage from collision with hard objects. When storing catalyst A-400, it should be stored at room temperature in a ventilated and dry warehouse to avoid damp environment, and the storage temperature should be kept below 25 C, avoid sunshine exposure as far as possible, away from water sources and heat sources. In order to prevent moisture absorption and oxidation, it is suggested to fill the container with nitrogen.

Quality guarantee period

Under the correct storage conditions, the shelf life is 6 months from the date of production, and it can still be used after the expiration of the shelf life.

security information

Catalyst A-400 is toxic to some extent and should be washed with soapy water in time after contact with skin. Workers can wear eye shields or safety glasses to protect their eyes. Eye washing and washing equipment should be provided near the workplace. Personal hygiene should be paid attention to when working in places where products may be contacted. Washing products should be used to clean the skin contacted with products before diet, smoking and leaving work.

Leakage treatment

Prevent leakage as much as possible while ensuring safety. If minor leaks are found, they can be treated with sand or other absorbent materials and then placed in clean, dry containers for subsequent treatment. If a large number of leaks occur, the leaked materials should be collected for subsequent treatment. Material should be avoided from entering groundwater or surface water because it is not easily biodegradable. All leaked materials collected should be treated in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The above information and technical advice are obtained from reliable sources, but we have no explicit and implicit assurance about the data provided, and we do not make any commitments here. If we need to use our products, we recommend a series of tests. The products used, used, processed or manufactured according to the technical information we provide are not within our control, so these responsibilities are borne by the users. The handling, storage, use or abandonment of this product is beyond our control and may exceed our knowledge. Under no circumstances shall we be liable for any loss, damage or related expenses caused by improper handling, storage, use or abandonment of this chemical. For more information, please check the technical safety instructions of our products or contact our market service department.