DABCO 1027 modified ethylene glycol solution of triethylenediamine is a structurally delayed tertiary amine catalyst. It can delay the time of milky white, increase the fluidity of the early stage, accelerate the curing of the rear end, shorten the ejection time and improve the production efficiency, improve the fluidity of the system, improve the dimensional stability of the foam, avoid the shrinkage of products, and have a higher catalytic effect on the reaction of polyols and isocyanates. It is an amine fast demoulding catalyst developed for polyester and polyether microporous sole and self skin foam system. It is an efficient catalyst for polyurethane foam sole, self foam foam and other microcellular foam systems.

Product specification

DABCO 1027 is a light yellow liquid at room temperature, soluble in water; viscosity (25 C): 75mPa. s; density (25 C): 1.1g/cm3; flash point (PMCC): 95 C; hydroxyl value (mgKOH/g): 1195.

Packing 

It is packed in clean, dry, sealed and leak-free barrels of iron or plastic, with a net weight of 25kg per barrel.

storage and transportation 

When transporting DABCO 1027, it should be strictly prevented from raining and contamination, and handled carefully to prevent leakage from collision with hard objects. When storing DABCO 1027, it should be stored at room temperature in a ventilated and dry warehouse to avoid damp environment, and the storage temperature should be kept below 25 C, avoid sunshine exposure as far as possible, away from water sources and heat sources. In order to prevent moisture absorption and oxidation, it is suggested to fill the container with nitrogen.

Quality guarantee period

Under the correct storage conditions, the shelf life is 12 months from the date of production, and it can still be used after the expiration of the shelf life.

security information

DABCO 1027 has a certain toxicity and should be washed with soapy water in time after contact with skin. Workers can wear eye shields or safety glasses to protect their eyes. Eye washing and washing equipment should be provided near the workplace. Personal hygiene should be paid attention to when working in places where products may be contacted. Washing products should be used to clean the skin contacted with products before diet, smoking and leaving work.

Leakage treatment

Prevent leakage as much as possible while ensuring safety. If minor leaks are found, they can be treated with sand or other absorbent materials and then placed in clean, dry containers for subsequent treatment. If a large number of leaks occur, the leaked materials should be collected for subsequent treatment. Material should be avoided from entering groundwater or surface water because it is not easily biodegradable. All leaked materials collected should be treated in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The above information and technical advice are obtained from reliable sources, but we have no explicit and implicit assurance about the data provided, and we do not make any commitments here. If we need to use our products, we recommend a series of tests. The products used, used, processed or manufactured according to the technical information we provide are not within our control, so these responsibilities are borne by the users. The handling, storage, use or abandonment of this product is beyond our control and may exceed our knowledge. Under no circumstances shall we be liable for any loss, damage or related expenses caused by improper handling, storage, use or abandonment of this chemical. For more information, please check the technical safety instructions of our products or contact our market service department.