Product introduction

The high springback opener GK-16 is a polyether type high resilience foam opener, which is mainly used for the production of high resilient foam. The product can achieve the required opening effect by adding a small amount of the product, which can obviously reduce the surface tension of the high resilient foam, promote the rupture of the bubble, effectively improve the opening rate of the product, and fully solve the problem of the closure and exhaust of the high resilience product. The product is a kind of high-efficiency opener. According to the different system, the recommended dosage is only 0.5-5 (per 100 copies of polyether), which is adjusted according to the field formula.

Product specification

GK-16 is a colourless transparent liquid at room temperature, with a viscosity of (25 C) mPa.s, 900-1200; hydroxyl value, mgKOH/g, 40-46; moisture content, 0.00-0.08; high efficiency, low odor, low VOC; and good compatibility with the system.

Packing

It is packed in clean, dry, sealed and leak-free special iron or plastic barrels, with a net weight of 200 kg or 25 kg per barrel.

storage and transportation

When transporting GK-16 with high resilience, it should be strictly prevented from raining and contamination, and handled carefully to prevent leakage from collision with hard objects. When storing high resilient opener GK-16, it should be stored at room temperature in a ventilated and dry warehouse, avoiding damp environment, and the storage temperature should be kept below 25 C, avoiding sunshine exposure as far as possible, away from water sources and heat sources. In order to prevent moisture absorption and oxidation, it is suggested to fill the container with nitrogen.

Quality guarantee period

Under the correct storage conditions, the shelf life is 6 months from the date of production, and it can still be used after the expiration of the shelf life.

security information

High resilience perforator GK-16 should be washed with soapy water in time after contact with skin. Workers can wear eye shields or safety glasses to protect their eyes. Eye washing and washing equipment should be provided near the workplace. Personal hygiene should be paid attention to when working in places where products may be contacted. Washing products should be used to clean the skin contacted with products before diet, smoking and leaving work.

Leakage treatment

Prevent leakage as much as possible while ensuring safety. If minor leaks are found, they can be treated with sand or other absorbent materials and then placed in clean, dry containers for subsequent treatment. If a large number of leaks occur, the leaked materials should be collected for subsequent treatment. Material should be avoided from entering groundwater or surface water because it is not easily biodegradable. All leaked materials collected should be treated in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The above information and technical advice are obtained from reliable sources, but we have no explicit and implicit assurance about the data provided, and we do not make any commitments here. If we need to use our products, we recommend a series of tests. The products used, used, processed or manufactured according to the technical information we provide are not within our control, so these responsibilities are borne by the users. The handling, storage, use or abandonment of this product is beyond our control and may exceed our knowledge. Under no circumstances shall we be liable for any loss, damage or related expenses caused by improper handling, storage, use or abandonment of this chemical. For more information, please check the technical safety instructions of our products or contact our market service department.