Mold washing water for aluminium mould

Product introduction

HW aluminium mould wash water, this wash water is designed and used for aluminium mould, only suitable for aluminium mould, other materials can not be used. For the die surface oil stains, dyes, dyes, demoulding agent residues, and other kinds of stubborn dirt can be done in minutes, has a strong decontamination and cleaning ability. No auxiliary tools are needed to remove, dissolve, soften and separate the die in an instant. It is easy to operate, has no damage to the die, prolongs the life of the die and improves the production efficiency.

Product specification

HW appearance: colorless transparent or yellowish liquid;

Packing

It is packed in clean, dry, sealed and leak-free special plastic barrel or baking varnish iron barrel. The net weight of each barrel is 25kg or 200kg.

storage and transportation

When transporting HW, it should be strictly prevented from raining and contamination, and handled carefully to prevent leakage from collision with hard objects. When storing HW, it should be stored at room temperature in a ventilated and dry warehouse to avoid damp environment, and the storage temperature should be kept below 25 C, avoid sunshine exposure as far as possible, away from water sources and heat sources. Or sealed in containers made of steel, aluminium, polyethylene or polypropylene. In order to prevent moisture absorption and oxidation, nitrogen is recommended to fill the containers.

Quality guarantee period

Under the correct storage conditions, the shelf life is 12 months from the date of production, and it can still be used after the expiration of the shelf life.

security information

HW is a corrosive solvent. Please wear rubber gloves when working. If hands or skin are contaminated with solution, please rinse it with a large amount of flowing water immediately. It is only suitable for the use of aluminium mould. Workers should wear eye shields or safety glasses to protect their eyes. Eye washing and washing equipment should be provided near the workplace. Personal hygiene should be paid attention to when working in places where products may be contacted. Washing products should be used to clean the skin contacted with products before diet, smoking and leaving work.

Leakage treatment

Prevent leakage as much as possible while ensuring safety. If minor leaks are found, they can be treated with sand or other absorbent materials and then placed in clean, dry containers for subsequent treatment. If a large number of leaks occur, the leaked materials should be collected for subsequent treatment. Material should be avoided from entering groundwater or surface water because it is not easily biodegradable. All leaked materials collected should be treated in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The above information and technical advice are obtained from reliable sources, but we have no explicit and implicit assurance about the data provided, and we do not make any commitments here. If we need to use our products, we recommend a series of tests. The products used, used, processed or manufactured according to the technical information we provide are not within our control, so these responsibilities are borne by the users. The handling, storage, use or abandonment of this product is beyond our control and may exceed our knowledge. Under no circumstances shall we be liable for any loss, damage or related expenses caused by improper handling, storage, use or abandonment of this chemical. For more information, please check the technical safety instructions of our products or contact our market service department.